| |
| COMPONENTS
|
LET
OFFS
Let Offs accurately control fabric tension using load cell feedback for closed
loop control. Multi-puck brakes or inverter drives provide a wide range of operating
tensions to process both light and heavy fabrics. |
|
|
ACCUMULATORS
Fabric Storage Accumulators maintain continuous operation of the treating system.
Hydraulic cylinders provide uniform and adjustable tension on the fabric.
Rigid construction, pre-stretched chains and alignment shafts provide positive
tracking to prevent fabric shift for years of consistent operation.
PLAS-TANK Dipping Stations
Litzler Dip Tanks, sized to minimize dip waste, are made of high-molecular-weight
polymer. The plastic has enhanced release properties that reduce cleaning time
as much as 75 percent.
Litzler Uni-Squeeze Rolls assure uniform squeeze pressure. Squeeze boost is activated
by the LMMI for extra pressure when splices are detected.
|
|
|
PLAS-VAC
Vacuum Extractors
The Litzler PLAS-VAC Vacuum Extractor, or DeWebber, was developed with extensive
research and customer input and uses the latest technology in both construction
and control. The system plays a critical role in adhesion and product quality.
The PLAS-VAC includes a vacuum head, primary settling box, secondary settling
box, bag filter and fan. For easy cleaning, the vacuum head and primary settling
box are made of the same high-molecular-weight polymer as Litzler Dip Tanks.
Vacuum pressure for each product is controlled via LMMI using inverter AC variable
speed drives with feedback pressure sensors.
|
|
|
The
Litzler PLAS-VAC also features:
SLOT-CLEAN, a continuous automatic slot-cleaning device
- Easy-to-remove,
track-mounted heads with a repeatable positioning system
- A
precision-machined, nozzle slot ensures accurate suction
velocity
- A
high static pressure blower with an AC inverter drive motor
to suit all parameters
- Primary
polymer setting box for fast, efficient separation
|
|
|
MM
(Match Machined) Tension Stands
Litzler MM Tension Stands convey the tire cord through the treating
system and allow separate tensions in the process zones. Matched
machining ensures perfect alignment of rolls, bearings and gears.
All bearings are lubed for life. Each tension stand includes an
automatic oil pumping lubrication system for the gears. Engineers use computer programs to select the proper number
and size of tension stand rolls and bearings.
To ensure critical alignments and reduce field installation
time and cost, Litzler MM tension stands are fully factory
assembled,
tested and certified to exacting standards.
|
|
|
PERFECT-WIND Surface Winders
The Litzler PERFECT-WIND Surface Winder, which produces rolls up
to 2000 mm in diameter, maintains accurate end count from beginning
to end of the wound package and ensures a finished package with
straight edges.
- Litzler's
patented, three-finger spreader -- the Rolliner -- spreads
treated tire cord and orients selvages prior
to winding
- An
electronic loadcell precisely measures compaction force to
accurately control package hardness. This assures
square sided package within
a guaranteed tolerance +/- 2mm layer to layer
- Easy-to-use
touch screen controls, ergonomic design and a smooth ejection
system allow for quick and easy roll
doffs.
The Litzler
- The
Litzler Perfect-Cut motorized cutoff can be installed at the
winding table
|
|
 |
| |
